KegMan Beer Tap Products       Division of Crossfire Engineering Inc.       Internet, Phone & Mail Order Only
(860) 292 - 6633     Noon to 5:00 PM Eastern USA Time

beer taps, keg connectors, keg couplers

Bud, Coors, Miller lever-type draft beer keg connector (beer tap) assembly
American Standard Lever
draft beer tap keg connector assembly

All KegMan beer tap assemblies are complete and ready to use in your existing draft beer tap system. They have a 3/16 beer nipple, a 5/16 gas line nipple, nuts and washers as pictured. If you need a 1/4 inch O.D. beer nipple, just let us know - there is no charge for a different size nipple..
Click on part number links to see typical pictures of the beer taps. Pictures may vary from actual product due to differences in manufacturers.
Gas draft beer tap, keg connector, Zapfkopf, Fadkobling, dispensing head, & keg coupler Assemblies
Each beer tap assembly comes complete: ready to plug into your beer system's hose.
Shipping weight for 1 connector is 3 pounds, add 2 pounds for each additional connector.
DescriptionPart NumberPrice
US Sankey Lever Tap Assembly
for all single valve Sankey kegs.
8010$28.12
Perlick Lo-Boy
American. Sankey when a tap must be less than ¼" above the keg rim.
8012$61.35
Tap-Right Low-Boy
American. Sankey when a tap must be less than 2¼" above the keg rim.
8018$40.64
European Sankey Lever Tap Assembly
for all single valve European kegs.
8058$34.57
US Twin Probe or 2-Probe Tap Assembly w/ss probes
for older American beer kegs
with 2 holes in large circle in top of keg
and a wooden bung in the side.
8030$39.70
Grundy (Bass) Lever Tap Assembly
for Bass, Watneys & other English single valve kegs
8052 $59.70
U.E.C. (Guinness) Lever Tap Assembly
for Guinness, Harp & other Irish single valve kegs
See Serving Guinness
8062$57.70
German Slider (Flat) Lever Tap Assembly
for German Slider kegs
8066 $63.37
Check Tap by Brewery for the correct beer tap to use with which brewery kegs.
See Tap Accessories and BeerStuff for Connector parts and accessories
See soda.htm for soda keg connector

Order

Gas draft beer tap, keg connector, Zapfkopf, Fadkobling, dispensing head, & keg coupler w/o beer nut nipple & washer
Shipping weight for 1 connector is 3 pounds, add 2 pounds for each additional connector.
May be used with (see Restricted Rod Assemblies to make picnic beer serving equipment for Foreign keg configurations.
(also see restricted rod parts)
descriptionPart NumberPrice
US Sankey Lever tap
for American single valve beer kegs.
8011$26.17
Tap-Right Low-Boy
American. Sankey when a tap must be less than 2¼" above the keg rim.
8019$38.69
European Sankey Lever tap 8060 $32.62
Twin Probe w/ss probes
for American draft beer kegs with two holes in top
and a wooden bung in the side.
8031 $37.42
Grundy (Bass) Lever tap
for Bass/Watneys beers and ales in kegs
8053 $57.75
U.E.C. (Guinness) Lever tap
for Guinness/Harp beers and ales in kegs
8063$57.75
German Flat Slider Lever tap 8065 $61.42
Sankey Wine Coupler with SS Probe8015$52.12
Check Tap by Brewery for the correct beer tap to use with which brewery kegs.
See Tap Accessories and BeerStuff for Connector parts and accessories
See Soda.htm for Soda Keg Connectors

Order

The beer taps sold by the KegMan come in many different types and styles for use on the many beer kegs used in the international market. All KegMan beer taps are made to the highest quality standards demanded by the professional bar, pub, tavern, and restaurant service industry.

Our draft beer taps or keg connectors are manufactured by Micro Matic, Tap Rite, Perlick, Hoff Stevens, the international leader in draft beer products to over 120 countries throughout the world, We also sell Perlick, Gold Star and Tap-Rite as required for each individual's requirements. We never sell the cheap beer tap products manufactured for home use by some unknowing "beer tap companies". Do not be taken in by the look-a-like, knock-offs sold in non-brewery affiliated stores. Most of our replacement beer tap sales are to home brewers who purchased the knock-off instead of the real thing for their home use.

If you are new to the beer tap world check out our beer tap tap_info.htm information page. Even some of our Tavern and Restaurant customers find the information enlightening. Anyway, it is free.

Always remember to clean your beer tap system at each keg change. See tap_clen.htm product page and our cleaning cleaning.html instruction page.

Always usebrewery approved hose.htm beer line from the KegMan. If you use plain vinyl tubing from the hardware store you will have a foamy, off-taste mess. Many accessories, wall mounts and jumpers can be found at beer_switch_fittings.html

The beer taps shown on this page are just the keg connector (or keg coupler); they have no hoses, faucets, regulators or pumps on then. If you require a complete draft beer system go to refrigerator conversion kits or Picnic taps for your needs. The most common beer tap is the Single Valve or Sankey type Tap and will work with most of the kegs used with the large American breweries for their beers. The second most in common usage is the European Sankey. Check with our beer tap Information page or your local beer supplier before ordering a beer tap if you are not sure what type to order. Check out our draft beer tap keg connector replacement Parts page. Also check out beer stuff for more specialized accessories.

To order just use our Secure Ordering Form. If is simple and was designed to protect your credit cards from any prying eyes.

Return to the KegMan Home Page or select from one of our fine Beer Taps.

If you require a complete home draft beer system go to the refrigerator conversion kits, Picnic tap or our barmobile tapster pages.

To order just use our Secure Ordering Form. If is simple and was designed to protect your credit cards from any prying eyes.

The KegMan product Index will bring you directly to the product group you may be interested in. Before you order you may want to read our draft beer tap information page. Our Ordering Information are provided to aid you in secure ordering of all our products. Our order and technical assistance phone line is open from Noon to 5:00 PM Eastern (9:00 AM to 3:00 PM Pacific) Time (US) on Mondays thru Fridays.

Got a Question? Email the KegMan

We are not responsible for typographical errors in prices or descriptions. Absolutely no returns after 30 days for any reason. Orders canceled within three days of receipt will be given a full refund by Connecticut Law. Items returned after 3 days will be given a store credit less a 30% restocking fee and no cash refund will be offered. Only merchandise returned in new and unused condition will be accepted for return. See terms for warrantee limits. No special order items may be returned. Most items carry a 1 year manufacturers warrantee. Prices may change without notice due to economic conditions. You must be over 18 years of age to order from the KegMan. All orders placed by customers without open accounts will be subject to a 4 percent surcharge on all charges for parts, labor, shipping and services. Shipping and handling charges are never refundable.

WebmasterCEI Sites
Internet SOLUTIONS NOT more questions.
CEI Sites: The Internet Professionals
 
 
Copyright © 1997 Crossfire Engineering Inc. (CEI) & CEI Sites