KegMan Beer Tap Products       Division of Crossfire Engineering Inc.       Internet, Phone & Mail Order Only
(860) 292 - 6633     Noon to 5:00 PM Eastern USA Time

Carbonators, seltzer makers, soda makers, beverage makers
All carbonators and items on this page are special order items and will be shipped directly to you by our supplier. We suggest you do not request Air Shipments as these items are very heavy.

Carbonators are mechanical devices into which the user flows cold water, CO2, and electricity. Carbonators output a continuous supply of wonderfully carbonated water. All carbonators on this page should be installed by a professional plumber in order to assure proper safety and hygienic procedures are followed. Sanitation requirements are the same as for drinking water. The requirements for use are as follows:
 
Note: The input water temperature of the faucet or draft arm must be between 32 and 34 degrees F. for the proper retention of carbonation when the seltzer or soda is poured. Failure to have the seltzer cold will cause partial to total loss of cabonation.

Also look at our Motorless Carbonators.

For occasional family use or office use the Soda-Club Fountain Jet counter top carbonator offers an affordable alternative to a carbonator.

Another option is the less expensive iSi Classic soda syphon. It is a beautiful polished stainless steel soda syphon, imported from Austria. The ss is impervious to the off tastes and odors given to the seltzer from the cheap aluminum and plastic copies. The syphon is top-of-the-line quality which will produce one quart of low carbonated beverage (seltzer) for each 8 gram CO2 bulb used. Erleben Sie die prickelnde Frische von reinem Sodawasser. Das moderne Design und das hochwertige Material machen den Edelstahl Siphon zu einem attraktiven und dekorativen Lieblingsstück, das in keiner Hausbar fehlen darf.

Carbonators - seltzer makers
Water filters are recommended to protect water quality & carbonators.
The McCann Compact Carbonator No. 5403 & 5404 for Commercial and home use. This carbonator will supply all the seltzer that 1 to 2 soda draft arms can demand. Requirements & Features:
  • Ventable Check Valve
  • Max Demand: 1 to 2 soda faucets output capacity.
  • Max Carbonation: 4+ volumes
  • Water inlet: 3/8 Male Flare
  • CO2 inlet: ¼ Male Flare
  • Carbonated Water outlet: 3/8 Male Flare
  • Base Dimensions: 9" by 10½ inches
  • Height: 13"
  • Electrical: 115VAC, 60Hz, 1/3hp
  • Shipping Weight: 27 Pounds
  • Price for p/n 5403: $383.3
  • Price for p/n 5404 (w/ventable check valve): $459.04
The McCann Fast Flow Carbonator No. 5405 & 5407 for High Usage (from 3 to 8 soda draft arms operating at one time). Requirements & Features:
  • Max Demand: High Volume Commercial Applications: 1 to 8 soda faucets output capacity.
  • Storage Tank: 2 gallons
  • Max Carbonation: 4+ volumes
  • Water inlet: 3/8 Mail Flare
  • CO2 inlet: ¼" Male Flare
  • Carbonated Water outlet: 3/8 Male Flare
  • Base Dimensions: 9" by 10½ inches
  • Height: 13"
  • Electrical: 115VAC, 60Hz, 1/3hp
  • Shipping Weight: 37 Pounds
  • Price for p/n 5405: $458.50
  • Price for p/n 5407 (w/ventable check valve): $521.25
The McCann Fast Flow Carbonators No. 5406 & 5408 for the same High Usage as the 5405 and 5407 but setup for dual voltage 115VAC/220VAC, dual frequency 50hz/60hz . Requirements & Features:
  • Max Demand: High Volume Commercial Applications: 1 to 8 soda faucets output capacity.
  • Storage Tank: 2 gallons
  • Max Carbonation: 4+ volumes
  • Water inlet: 3/8 Mail Flare
  • CO2 inlet: ¼" Male Flare
  • Carbonated Water outlet: 3/8 Male Flare
  • Base Dimensions: 9" by 10½ inches
  • Height: 13"
  • Electrical: dual voltage/ dual frequency, 1/3hp
  • Shipping Weight: 37 Pounds
  • Price for p/n 5406: $503.85
  • Price for p/n 5408 (w/ventable check valve): $569.84

Order

 Soda Fountain Seltzer Draft Arm
Soda fountain seltzer faucet

Just what you need for the real early 1900's look with "Turn of the Century" Style.
1911 Soda Fountain look, feel and function.

The KegMan now offers a fine addition to any soda fountain. Add a pleasing look and function to your soda fountain with either this seltzer or the matching water draft arm. Just pull the handle forward for a course stream of seltzer. Or for a finishing touch, push it back for a jet stream of seltzer (this applies to the seltzer draft arm only and not the water, pre or post mix units. With simplicity of design these faucets will give you years of trouble free service. Pull handle forward for full flow seltzer or soda. Push handle backward for high velocity stream of seltzer or soda for the perfect soda fountain treat.

Dimensions:

  • Base to bottom of spout: . . . . . . . 7.75"
  • Over all height . . . . . . . . . . . . . . . . 15"
  • Overhang from center . . . . . . . . . . 3½"
  • Draft arm inlet: ¼ hose Nipple
  • Shipping Weight: 13 Pounds
  • Price for single product seltzer draft arms 5431 is $238.94 each.
    This can be used with water, seltzer or soda and has a dual outlet feature for volume (forward) or high velocity stream (backwards).
  • Replacement leather hex washers:
    3 hole are p/n 5488 @ $3.75 each
    4 hole are p/n 5489 @ $3.50 each
  Post Mix Soda Fountain Seltzer Draft Arms
Soda fountain seltzer faucet

Just what you need for the real early 1900's look with "Turn of the Century" Style.
1911 Soda Fountain look, feel and function.

The KegMan now offers a fine addition to any soda fountain. Add a pleasing look and function to your soda fountain with either the pre-mix or post mix versions of these soda draft arms. These arms are quite similar to the seltzer model above but are slightly different in appearance. Just pull the handle forward for a course stream of soda.

Specify pre or post mix when ordering!

  • Price for one product post mix soda fountain draft arm item number 5498: $232.18
  • Price for two product soda fountain draft arm number 5436: $297.35
  • Price for three product soda fountain draft arm number 5437: $356.38
Wall Mount seltzer faucet

Cornelius Wall Mount Pre-Mix Dispensing Valve

A perfect wall or cabinet mounted soda faucet with flow control adjustments, compensator & inlet fitting for serving seltzer. Requires a ¼" Female flare coupling to mate with plastic MFF supplied with faucet.

  • Soda "Thru the Wall" Faucet is Part Number 5433
  • Shipping Weight: 4 Pounds
  • Price: $66.77
Wall Mount seltzer faucet

Cornelius Hand-Held Pre-Mix Squeeze Valve

A perfect hand held soda faucet with flow control adjustments, compensator & inlet fittings for serving seltzer. Requires a ¼" Female flare coupling to mate with plastic MFF supplied with faucet.

  • Soda "Squeeze" Faucet is Part Number 5434
    Inlet fitting is
  • Shipping Weight: 4 Pounds
  • Price: $66.77

Return to
Beer & Stout Faucets.
Soda Cold Plates
Soda Booster Boxes
Soda Fountain Water Draft Arms
Recommended Carbonator Water Filters

Syrup Pumps
Soda fountain syrup pumps
  • High Impact Plastic 3-Quart Syrup Jar No. 5485 is $18.46 each
  • Stainless Steel Syrup Pump w/knob No. 5486 is $69.28 each
  • Steel 4-Flavor Syrup Jar Rail No. 5487 is $216.87 each

Order

Hook-Ups for Carbonators
See Flare Fitting Washers for carbonator flare washers.
See Hook-Up Instructions for details.
DescriptionPart NumberPrice
Complete Standard Carbonator Flare Fitting Connections
Order hoses Separately - Contains one SS 3/8 Flare to 1/4 Tube Seltzer Outlet, two 1/4 flare to 1/4 tube gas fittings, one 3/8 flare to 3/8 tube water inlet fitting, flare washers and hose clamps.
5468$17.79
Soda Draft Arm to Carbonator four foot ¼" hose with one ¼" hose to 3/8" flare Stainless Steel fitting and two clamps.5440$10.60
Regulator to Carbonator four foot ¼" hose with ¼" hose to ¼" flare fittings and clamps on both ends.5450$11.10
Carbonator Water Inlet Assembly four foot 3/8 hose with 3/8" hose to 3/8" flare fitting and two clamps. Will mate with any 3/8 hose nipple on your water supply.5460$13.55
Carbonator Gas, Water and Seltzer hose - SeeCarbonator Hose
Carbonator Flare Fittings
Seltzer Outlet Fitting: Stainless Steel 3/8" Flare to ¼" Tubing9905$4.35
Regulator Gas Outlet Fittings ¼ Flare to ¼" Tubing5454$2.19
Carbonator Gas Inlet Fittings ¼ Flare to ¼" Tubing5454$2.19
Carbonator Water Inlet, Brass, 3/8 Flare to 3/8 tubing5461$3.05
See CP Fittings for all cold plate fittings.
See Regulator for all your regulator requirements.
See Washers for cold plate and other flare fitting washers.
½" x 16 Straight Pipe Soda Fittings
Soda MPT to ¼" tube barb9910$12.23
Soda FPT to ¼ Male Flare Fitting9911$12.90
Soda FPT to ¼ tube barb9911$12.90
See Washers for ½" nylon washers

Order

Return to the KegMan Home Page or select from one of our fine Beer Taps.

If you require a complete home draft beer system go to the refrigerator conversion kits, Picnic tap or our barmobile tapster pages.

To order just use our Secure Ordering Form. If is simple and was designed to protect your credit cards from any prying eyes.

The KegMan product Index will bring you directly to the product group you may be interested in. Before you order you may want to read our draft beer tap information page. Our Ordering Information are provided to aid you in secure ordering of all our products. Our order and technical assistance phone line is open from Noon to 5:00 PM Eastern (9:00 AM to 3:00 PM Pacific) Time (US) on Mondays thru Fridays.

Got a Question? Email the KegMan

We are not responsible for typographical errors in prices or descriptions. Absolutely no returns after 30 days for any reason. Orders canceled within three days of receipt will be given a full refund less SIH. Items returned after 3 days will be given a store credit less a 30% restocking fee and no cash refund will be offered. Only merchandise returned in new and unused condition will be accepted for return. See terms for warrantee limits. No special order items may be returned. Most items carry a 1 year manufacturers warrantee. Prices may change without notice due to economic conditions. You must be over 18 years of age to order from the KegMan. All orders placed by customers without open accounts will be subject to a 4 percent surcharge on all charges for parts, labor, shipping and services. Shipping and handling charges are never refundable.

WebmasterCEI Sites
Internet SOLUTIONS NOT more questions.
CEI Sites: The Internet Professionals
 
 
Copyright © 1997 Crossfire Engineering Inc. (CEI) & CEI Sites