KegMan Beer Tap Products       Division of Crossfire Engineering Inc.       Internet, Phone & Mail Order Only
(860) 292 - 6633     Noon to 5:00 PM Eastern USA Time

Cold Plates
All cold plates are special order and will be shipped from our suppliers directly to you. We cannot guarantee shipping times on these items.

KegMan cold plates are used in bars, pubs, restaurants, soda fountains, taverns and even homes to cool 55° F. beer, wine, soda, seltzer, and juice to ice temperatures. If you like really cold draft beer from a tap then you need a cold plate and ice. These cold plates are made by casting a formed stainless steel coil into an aluminum blocks for strength and heat transfer from the beer to the ice. No bar beer tap system can be considered complete without a cold plate to bring the brew down to 37° F.

Cold plates are only recommended when the internal product (keg, cask, bag, or water supply) temperature can be kept below 55° F. The product can be continually drawn from the faucet at 37° F. when the source is kept at or below the 55° F criteria and ice is maintained on the surface of the cold plate. Warmer product may require a two product cold plate hooked up in a series loop fashion for continuous drawing of warmer product temperatures or demand will have to be limited to maintain cold output temperatures. Cold Boxes with cold plates are available for picnics and parties.

When it is impossible to keep the internal pre-cooled product temperature below 55° F. and continuous draw is expected, we recommend using a coil box (cooler) with a 120 feet of stainless steel coilinside that is covered with ice. With the 120 foot coil room temperature product can be served continuously at 40 to 42° F. As with the cold plate, product temperatures will be maintained even during continuous draw with the full 120 foot coil. High temperature (hot) product must be drawn at a lesser than continuous rate if the 40 to 42° F. is desired at the output.

When using a cold plate it is important to keep the plate from setting in any water so that it is continually in contact with the ice. A drain in the cold box is recommended. Periodic pushing down on the cold plate will help cool the product.

For electrical four product flash coolers see Flash Chillers.

Beer cold plate
Beer Cold Plates
Order Fittings Separately. These cold plates require ½ inch by 16 tpi flare fittings. Cold plates are made of Stainless steel (SS) tubing cast into rugged aluminum blocks for long service life.
plate size
(inches)
Tube Length
(feet)
Number
Circuits
Part
Number
Weight
(lbs.)
Price
U.S. Dollars
8" x 12"1/4" x 12'1845112$84.37
8" x 12"1/4" x 12'2845212$91.44
8" x 14"1/4" x 14'2845312$104.37
8" x 14"1/4" x 14'3845612$137.87
8" x 14"1/4" x 14'4846412$148.87
10" x 15"1/4" x 18'1846518$103.37
10" x 15"1/4" x 18'2846618$115.87

Order

Soda cold plate
Soda Cold Plates
Order Fittings Separately. These cold plates require ½ inch by 16 tpi flare fittings. Cold plates are made of Stainless steel (SS) tubing cast into rugged aluminum blocks for long service life.
plate size
(inches)
Tube Length
(feet)
Number
Circuits
Part
Number
Weight
(lbs.)
Price
U.S. Dollars
8" x 12"1/4" x 12'1547512$96.08
8" x 12"1/4" x 12'2547612$120.88
8" x 14"1/4" x 12'5547712$207.68
8" x 14"1/4" x 12'7547812$251.08
10" x 15"1/4" x 18'1547916$144.13
10" x 15"1/4" x 18'2548017$159.63>
10" x 15"1/4" x 18'6548117$294.48
12" x 18"1/4" x 19.5'45482 21 $382.83

Order

Return to Beer Tap Index

Soda booster box

Booster Boxes

Booster boxes are required in commercial establishments when cooling ice will be used in customer beverages. 2 circuit booster boxes are shown in picture. 6 circuit boxes are not shown and require fittings to be ordered separately. 6 circuit booster boxes use standard KegMan cold plate fittings.

ModelCapacity
(lbs ice)
Tube Length
(feet)
Number
Circuits
Part
Number
Weight
(lbs.)
Price
U.S. Dollars
Shelf181/4" x 15' 25471-28$447.20
Tall361/4" x 15'25472-212$472.13
Drop in361/4" x 15'25473-2 16 $475.90
Shelf183/16" x 15'65471-618$627.66
Tall363/16" x 15'65472-624$634.16
Drop in363/16" x 15'65473-624 $628.96

Return to Beer Tap Index

Cold Plates Fittings
All KegMan Cold Plates use these ½" x 16 tpi male flare fittings.
Cold Plate Fittings DescriptionPart NumberPrice
Fitting, Beer Threads8471$5.25
Fitting with 3/8 barbed hose nipple8472$5.63
Fitting with 1/4 barbed hose nipple8473$5.25
Flare Fitting Washers

Order

KegMan portable draft beer cart with optional umbrella      Click herefor portable draft beer dispensers.


Return to the KegMan Home Pageor select from one of our fine Beer Taps.

If you require a complete home draft beer system go to the refrigerator conversion kits, Picnic tapor our barmobile tapsterpages.

To order just use our Secure Ordering Form. If is simple and was designed to protect your credit cards from any prying eyes.

The KegMan product Indexwill bring you directly to the product group you may be interested in. Before you order you may want to read our draft beer tap informationpage. Our Ordering Informationare provided to aid you in secure ordering of all our products. Our order and technical assistance phone line is open from Noon to 5:00 PM Eastern (9:00 AM to 3:00 PM Pacific) Time (US) on Mondays thru Fridays.

Got a Question? Email the KegMan

We are not responsible for typographical errors in prices or descriptions. Absolutely no returns after 30 days for any reason. Orders canceled within three days of receipt will be given a full refund by Connecticut Law. Items returned after 3 days will be given a store credit less a 30% restocking fee and no cash refund will be offered. Only merchandise returned in new and unused condition will be accepted for return. See terms for warrantee limits. No special order items may be returned. Most items carry a 1 year manufacturers warrantee. Prices may change without notice due to economic conditions. You must be over 18 years of age to order from the KegMan. All orders placed by customers without open accounts will be subject to a 4 percent surcharge on all charges for parts, labor, shipping and services. Shipping and handling charges are never refundable.

WebmasterCEI Sites
Internet SOLUTIONS NOT more questions.
CEI Sites: The Internet Professionals
 
 
Copyright © 1997 Crossfire Engineering Inc. (CEI) & CEI Sites