| NOTE 1: The bulk of the carbon dioxide (CO2) in a cylinder is liquid CO2, only the head space of the tank contains gas. These cylinders are constant pressure cylinders as long as there is liquid in the cylinder. When the liquid has all evaporated there is nothing left in the takn but the CO2 in the gasious state. As long as the cylinder contains any amount of this liquid the regulator's high pressure gage will only read full. The high pressure regulator gage does not represent anything but the tanks temperature when liquid is present in the tank. When the liquid is depleated, the pressure will rapidly decline to zero. Only 50 pound and larger cylinders will contain enough gas to supply a reserve to tide you over till a refill can be obtained. The high pressure gauge will never represent the quantity of liquid carbon dioxide remaining in the tank. The amount of liquid carbon dioxide remaining in a tank can only be is determined by the weight of the tank less the tare weight (TW) of the tank. The tare weight is printed (stamped) on the neck of the CO2 bottle or tank. |
| NOTE 2: CO2Gas Regulators. All the CO2 regulators have CGA 320 fittings for USA & Canada. A CGA-320 fitting has a 0.825-14 NGO-Right Hand Thread. Countries outside the USA and Canada also use this fitting but you will have to check with your local gas company to see if your country complies with the CGA standard. All CO2 and beer gas regulators come with a shut off and a 5/16 inch hose barb on the outlet. Pictures may vary from actual hardware shown. |
KegMan Standard Primary CO2 Beer RegulatorsAll standard regulators carry a manufacturers' 1 year materials and workmanship warranty. These regulators have a 55 - 65 psig non-adjustable safety relief valve. These regulators all mate with the CGA 320: .825-14 NGO-RH-EXT Flat Nipple Tanks found in most parts of the world. | ||||
 | ||||
| 6311 | Std. 1 Gauge Regulator - The perfect regulator for CO2 cylinders under 50 pounds where knowing you are out of liquid CO2 is not sufficient warning to get a new cylinder. | $50.26 | ||
| 6312 | Std. 2 Gauge Regulator - For all 50 pound and larger cylinders where there is enough time to order a refill after the liquid CO2 runs out. | $60.75 | ||
| 6316 | Std. 1 Gauge w/2 shut-offs Regulator For serving two kegs of beer from one CO2 cylinder. | $72.76 | ||
Micromatic Premium Primary Beer RegulatorsAll standard and premium regulators carry a Micro Matic 3 year materials and workmanship warranty. The standard regulators are produced in the USA while the premium ones are produced in Germany. These regulators have a 55 - 65 psig non-adjustable safety relief valve. Both regulators are giving years of faithful service in bars and taverns around the world. These regulators all mate with the CGA 320: .825-14 NGO-RH-EXT Flat Nipple Tanks found in most parts of the world. | |||
 | |||
| 6321 | Premium 1 Gauge Beer CO2 Regulator | $60.61 | |
| 6322 | Premium 2 Gauge Beer CO2 Regulator | $66.01 | |
| 6323 | Premium 2 Gauge w/2 shut-offs Beer CO2 Regulator | $84.91 | |
| KegMan N2 and Beer Gas High Pressure Regulators | |||
|---|---|---|---|
 | |||
| 6371 | High Pressure (5-155) Nitrogen N2 Regulator 2 gauge, 10-110 psig. Mate with: CGA 580: 0.965-14 RH-INT Tanks This is the Regulator for Stout and lager beer gas mixes. | $56.12 | |
| 6379 | Beer Gas (5-55) Regulator 2 gauge, 10-110 psig. Mate with: CGA 580: 0.965-14 RH-INT Tanks This is the Regulator for Stout and lager beer gas mixes. | $56.12 | |
| 6317 | High Pressure CO2 Gas Regulator, 2 gauge 10-110 psig Recommended for use with Gas Blenders, 115-125 psig outlet pressure. Mate with CGA 320: .825-14 NGO-RH-EXT Flat Nipple Tanks | $57.37 | |
| 6371 | Wine Gas Regulator 2 gauge, 10-110 psig. Mate with: CGA 580: 0.965-14 RH-INT Tanks This is a Nitrogen Regulator for serving wine without carbonating the beverage. | $56.12 | |
