!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> refrigerator conversion kits for a draft beer tap system at home

KegMan Beer Tap Products       Division of Crossfire Engineering Inc.       Internet, Phone & Mail Order Only
(860) 292 - 6633     Noon to 5:00 PM Eastern USA Time

standard refrigerator conversion kit

KegMan's standard refrigerator conversion kit

The perfect starter conversion kit for anyone who wants all the benefits of a home draft beer system without a large start up cost. Perfect draft beer every time with just a pull on the faucet knob with the ease of a full CO2 gas beer tap system.
You buy the beer and CO2 tank - we supply the rest
Drip trays may vary from one shown

KegMan Products is proud to present our standard refrigerator conversion kit. Each Standard refrigerator conversion kit is fully upgradable to the Deluxe refrigerator conversion kit without sacrificing any parts on the up-grade. It is offered as one of our four choices in refrigerator conversion kits on the KegMan site. Our Standard kits range from $123.40 to $253.09 depending on keg couplers and types of beer and stout gases.

Standard refrigerator conversion kits by KegMan Products
Order CO2 Tank Separately
Shipping Weight is 10 pounds
description of Keg Connector Supplied with KitKit Part NumberPrice
Standard Kit w/American tap for most North American beers9822$123.40
Standard Kit w/TapRite LowBoy tap for most North American beers in tight spaces9825$134.67
Standard Kit w/Perlick LowBoy tap for most North American beers in tight spaces9823$155.14
Standard Kit w/Twin Probe tap9824$124.80
Standard Kit w/European tap9826$129.00
Standard Kit w/Grundy (Anchor Steam/Bass/Caffreys/Watney) tap9827$153.57
Standard Kit w/German Flat Slider tap9828$157.00
Standard Kit w/U.E.C. tap for CO29829$153.57
Standard Kit w/Ball Soda Connectors
Not for commercial beers - homerew only
9832$133.23
Standard Kit w/Pin Soda Connectors
Not for commercial beers - homerew only
9833$135.25
Standard Chrome Kit for Beer Gas stouts and ales with U.E.C. Connector9831$246.25
Standard BRASS Kit for Beer Gas stouts and ales with U.E.C. Connector9830$253.09

Order

The parts listed below are common to all standard conversion kits; the keg connector is included with the kits but the part number is not given here since the part number selection table above lists that component. The shipping weight is 12 pounds. Do not order kits by individual part numbers below. Use the kit part numbers above when ordering.

The CO2 beer and ale standard refrigerator conversion kit has the following components:

The Beer Gas stout and ale standard refrigerator conversion kit has the following components:

Other Refrigerator Conversion Kit part numbers and prices are located at:


Order

Cleaning Instructions and Installation Instructions mab be found at these preceeding references.

For help in determining which keg connector you need see the beer tap Information page and AccessoriesPage. For help in remotlong_draw_draft_system.htmlsituations see Long Draw Information and subsequent pages. Remember, you can always call the KegMan for assistance between Noon and 5:00 PM EST.

None of the KegMan conversion kit are supplied with a carbon dioxide tank because of the expense to you in shipping. We do sell tanks separately if you are having difficulty finding a gas supplier who sells the tanks. We always recommend that you purchase your tanks from a local industrial gas supplier or welding supply company since you will be getting your gas there anyway. While we charge the same, why not avoid the middle man and the shipping costs? One of our refrigerator conversion kits will provide you with years of trouble free draft beer service because our kits are made up from parts we use in bars, tavern, and restaurants. You can be sure of the best quality, dependability, and lowest maintenance when you buy from us. And we have a real advice line too.
 
Yes we do sell draft beer Cooler / Dispensers (a.k.a. tapsters, clubster, barmobile, kegulators) but if you cannot afford the cost of one of these high end items you can convert any refrigerator or freezer into a great draft beer machine for as low as $70.34.

Freezer Temperature Controller:   KegMan Products has one option you may wish to consider: Part number 9025 Thermostatic Control Device which allows any freezer to be regulated between 20°F and 80°F to allow kegs of beer to be kept and served from inexpensive chest freezers where towers can easily be mounted to the lids for a perfect bar counter top. KegMan pKegMan part number see 9025 for price, other than plugging it in to the wall and then plugging the freezer cord into the controller.


If you require a complete home draft beer system go to the refrigerator conversion kits, Picnic tap or our barmobile tapster pages.

To order just use our Secure Ordering Form. If is simple and was designed to protect your credit cards from any prying eyes.

The KegMan product Index will bring you directly to the product group you may be interested in. Before you order you may want to read our draft beer tap information page. Our Ordering Information are provided to aid you in secure ordering of all our products. Our order and technical assistance phone line is open from Noon to 5:00 PM Eastern (9:00 AM to 3:00 PM Pacific) Time (US) on Mondays thru Fridays.

Got a Question? Email the KegMan

We are not responsible for typographical errors in prices or descriptions. Absolutely no returns after 30 days for any reason. Orders canceled within three days of receipt will be given a full refund by Connecticut Law. Items returned after 3 days will be given a store credit less a 30% restocking fee and no cash refund will be offered. Only merchandise returned in new and unused condition will be accepted for return. See terms for warrantee limits. No special order items may be returned. Most items carry a 1 year manufacturers warrantee. Prices may change without notice due to economic conditions. You must be over 18 years of age to order from the KegMan. All orders placed by customers without open accounts will be subject to a 4 percent surcharge on all charges for parts, labor, shipping and services. Shipping and handling charges are never refundable.

WebmasterCEI Sites
Internet SOLUTIONS NOT more questions.
CEI Sites: The Internet Professionals
 
 
Copyright © 1997 Crossfire Engineering Inc. (CEI) & CEI Sites